Home > General > Green Power, Materials and Manufacturing Technology and Applications
Green Power, Materials and Manufacturing Technology and Applications

Green Power, Materials and Manufacturing Technology and Applications

          
5
4
3
2
1

Out of Stock


Premium quality
Premium quality
Bookswagon upholds the quality by delivering untarnished books. Quality, services and satisfaction are everything for us!
Easy Return
Easy return
Not satisfied with this product! Keep it in original condition and packaging to avail easy return policy.
Certified product
Certified product
First impression is the last impression! Address the book’s certification page, ISBN, publisher’s name, copyright page and print quality.
Secure Checkout
Secure checkout
Security at its finest! Login, browse, purchase and pay, every step is safe and secured.
Money back guarantee
Money-back guarantee:
It’s all about customers! For any kind of bad experience with the product, get your actual amount back after returning the product.
On time delivery
On-time delivery
At your doorstep on time! Get this book delivered without any delay.
Notify me when this book is in stock
Add to Wishlist

About the Book

Volume is indexed by Thomson Reuters CPCI-S (WoS). The aim of this special volume was to facilitate the exchange of information on the best practices for Sustainable Power, Sustainable Materials, Green Manufacturing Technology and Applications, etc. It provides an opportunity for engineers and scientists, in academia, industry and government, to address the most innovative research and development ideas, including technical challenges, social and economic issues, and to discuss ideas, results, work-in-progress and experience concerning all aspects of Green Power, Materials and Manufacturing Technology and Applications. The work offers the reader a wealth of ideas.

Table of Contents:
Preface, Committees and Reviewers Part 1 Chapter 1: CAD, CAM, CAE Research on the Multidisciplinary Optimization Design Method for the Diesel Engine Approach Toward Parametric Design of Typical Parts and Parts-Library Based on UG Design and Study of Gate-Type Steel-Shuttering Jumbo for Tunnel Lining Based on CAD/CAE MDO of the Transmission System Based Collaborative Optimization The Development of Physique Monitoring CAD System Based on RBF Neural Networks The Design of SVM-Based Fitness Consulting CAD System The Exploration of Fuzzy Inference-Based Fitness Monitoring CAD System The Influence of Green Therapy Curing Kinetics of Octaepoxysilsesquioxane/MNA System Chapter 2: Composite Design and Optimization Structure and Properties of Regenerated Cellulose Film with Fluorocarbon Coating Effect of Sintering Temperature on Microstructure of Porous Materials Using Iron Tailing and Shale Effect of Zr Content on Properties of Mg-Zr PM Damping Alloys Preparation of Corundum/Mullite Composites by Sintering Synthesis of Ultrafine Long Afterglow Phosphor with High Brightness via Al2O3 Coating Route Analyzing Relationship between Genetic, Geographical Factors and Protein Content of Winter Wheat at Different Regional Scales Experimental Research of the Anodic Bonding in the Si-Glass-Si 3-Layer Structure Influence of Depositing Parameters on Microstructure of Ni-Co Pulse Plating Fine Particle Dispersion and Deposition in Three Different Square Pore Flow Structures Some Research on the Medical Materials Concrete Property Analysis with the Perspective of “5-10-14-18” and “5-10-18-22” Band Gradation Chapter 3: Control, Constitutive Modeling and Simulation The Application of Multi-Agent Technology in the Fault Diagnosis System of Motor Armature Multivariate Statistical Process Monitoring and Fault Diagnosis Based on an Integration Method of PCA-ICA and CSM A Secondary Development System on Grader Working Device Oriented to Mechanism Optimization T-S Fuzzy Control for Maximum Power Point Tracking of Solar Power Generation Systems Research of Single Granule and Granule Group Motion Model by DEM Modeling and Simulation of Hydraulic AGC System in a Cold Mill The Research on CNC Machine Tool’s Position Limit Protection Equipments Based on Negative Logic Control The Application of the Baseline and Monitoring Methodologies to the Renewable Energy for Base Stations Project Roll Damping and Anti-Capsizing System for Ships Using Fuzzy-Extension Control Strategy Modelling and Simulation of Phased Array Transducers Base on Advanced UT Techniques Building New Reliable Wireless Network by Using Distributed Control The Research on H2 Optimal Control Applied to Active Vibration Isolation Chapter 4: Dynamics, Vibration and Time-Dependent Deformation Research on New Machining Method that Cutting Arc Surfaces in SIEMENS840D System Prediction of Compressive Strength of Aerated Lightweight Aggregate Concrete by Artificial Neural Network Active Vibration Control for Lathe Based Neural Network Influence of Structural Parameters on Mechanical Properties of Double-Block Ballastless Track Collision-Free Trajectory Generation for Waterway Surfaces of a PDC Drill Bit Effect of Impact Position and Initial Velocity on Structure of Collided Tanker Experimental Research on Mechanical Calculation of Fascine Object’s Underwater Falling The Harmonic Response Analysis on Vibration System of Disc Vibration Dryer Particle Swarm Optimization Based Dimension Synthesis of the Experimental Mechanism for Elastic Bungee Jumping Ropes Incipient Hydrate Formation Pressure-Temperature and Equilibrium Composition for CH4-N2-O2-THF-H2O System The High Stress Soft Coal Seam Face Prediction Sensitive Index Critical Value Research Application and Advance in Super-Hard Tool Material Chapter 5: Energy Efficiency, Environment Ecology Environmental Characteristical Study on Pyrite Smelting Slag Study on Hydrological Simulation of Jin River Based on SWAT-X Model Numerical Simulation of the Mechanically Pumped Two-Phase Cooling Loop Investigation on the Heat Exchange Characteristics of the Condenser for Space Applications Experimental Investigation on the Accumulator Liquid Distribution of Mechanically Pumped Cooling System Impact of Different Film-Cooling Modes at Trailing Edge on the Aerodynamic Performance of Heavy Duty Gas Turbine Cascade Environmental Activity of Heavy Metals in Slags Treated by Electrokinetic Removal Technology Reformed Hydrous-Ethanol Application in Spark Ignition Engine Numerical Simulation of Furnace Combustion Characteristic in HTAC Numerical Simulation of Natural Convection Heat Transfer on Microencapsulated PCM Slurries Readout Circuit for Uncooled Pyroelectric IRFPA Chapter 6: Green Design Technology Optimum Design of Multi-Axle Trailer’s Steering Mechanism Based on ADAMS Discussion on the Design of a New Type Down-Hole BOP Mechanism Implementation for a 4WID/4WIS Unmanned Vehicle Optimal DFIG Converter Protection Design under Different Controllers A Material Selection Model of Mechanical Products Based on Total Life Cycle Design Recent Nanofabrication of Silicon Dioxide on Silicon Wafer Using AFM Operated at Low Temperature Design of Material Electrostatic Test Platform The Design of Multi-Index System on UCAC2 Catalog The Design of Automatic Rotary-Rivet-Placing System Chapter 7: Green Manufacturing Technology Calculation and Analysis of Microstructure of Austenitic Steel for Supercritical Unit Development for the Optimization Technique of the Coiling Tension in Degreasing Unit A New Type of Pig Handling Trolley Machining Accuracy Analysis and Error Compensation Approach with the Effects of Cutting Tool Tip’s Radius in NC Lathe Machining Process Improvement and Implementation of Numerically-Controlled Process for Edger Mill Stand Optimization and Realization of Bridge Girder of 320/50t-22m Quenching Crane Research on Structural Parameters of Conical Nozzle Intelligent Prediction on the Quality of Cementing Study on Roller Eccentricity Compensation in a Cold Mill Study on Soft Zone of Type 420 Stainless Steel Weldment during the Induction Brazing Process Research on Machining Methods of Turning Trapezoidal Thread for Slender Axle on Lathe Optimum KOH Wet Etching of Cantilever Tip for Better Image Captured by Nanoeducator Analysis of Milling Forces in Slot Milling of Aluminum Alloy with Three Flutes Cutter Part 2 Chapter 8: Green Power Systems and Power Electronic Circuits Application of Intelligent Data Mining Method for Traffic Forecasting Research on Signal Timing Method of Intersection Based on RFID Rapid Design of Low-Voltage Motor Protector Based on Axiomatic Theory Computer Modeling for the CFG Pile in Highway Soft Foundation Numerical Simulation of NO Conversion in the N2/O2/NO by Dielectric Barrier Discharge Investigation of Annealing Effect on the Electrical and Optical Properties of ITO Film Prepared by Sol-Gel Process The Design of Double Liquid Zoom Lens’ Model Based on Electrowetting Effect Study on Fault Signal Detection for PMLSM Application Design of CAN Bus (CANOpen) for Rotary Screen Printing Machine Experiment Platform Design cSPACE-Based for a Permanent Magnet Linear Synchronous Motor Driven Inverted Pendulum Digital Filter Design in Power’s Harmonic Wave Detection Acquisition and Analysis on 3D Deformation of Windshield Glass in Vehicle-Pedestrian Accident Study on the Current Application Situation and Development of E-Portfolio Based on ICT for Mechanical Components Using Genetic Algorithms Chapter 9: Material Formulations, Evaluation, and Processing A Study of the Microstructure and Hardness of Ti-5Al-2Sn-2Zr-4Mo-4Cr by Laser Shock Peening Study on Intensified Bioleaching Technology by Static Magnetic Field of Chalcopyrite Tailings Influence of Mo/Sb Co-Doping on Scintillation Properties of PbWO4 Crystal Preparation and Properties of Polyvinyl Alcohol (PVA)/Polyvinyl Pyrrolidone (PVP) Hydrogel Preparation of Activated Alumina Admixture High Efficient White-Phosphorescence PLEDs by Using Water/Alcohol-Soluble Polyelectrolyte as an Electron Injection Layer Study on the Hydrolytic Stability of Borate Ester Preparation and Photocatalytic Activity of Laden SiO2/TiO2 Composite Photocatalyst Modification of Polishing Putty: A Study on Inorganic Filler The Research of Silica-Coated Chromium Oxide Green Pigment Prepared by Liquid Phase Method Octaepoxysilsesquioxane Cured by Different Curing Agents Chapter 10: Mechanics in Tribology and Lubrication Engineering Drive Spindle Simulation for Continuous Rolling A Preliminary Investigation on Friction Stir Spot Welding of Steel/Mg Study on the Tribological Properties of Porous UHMWPE Research on Noise Generation Mechanism of Rubber Material for Water-Lubricated Bearings Recent Progress of Vibration Analysis on Fault Diagnosis for Rolling Bearing Effect of Substrate Conditions on Residual Stress of Plasma-Spraying Sm2Zr2O7 Thermal Barrier Coatings Real-Time Reliability Analysis and Optimal Distribution of the Reliability on Five-Axis Machining Center Visual Inspection on Premature Failure of Electric Motor Bearings Finite Element Thermo Analysis of Friction Material Enhanced by Bamboo Fiber Chapter 11: Optical and Visual Signal Research on Magnetic Properties of Nd2Fe14B/a-Fe/Nd2Fe14B Exchange-Coupled Trilayer Films Two-Photon Excitation Fluorescence Lifetime Imaging Based on Time-Correlated Single Photon Counting A Control System for Traffic Light Based on GPRS Chemical Sensors Based on Fiber Bragg Grating Monitoring of Microorganisms Growth Process Based on Fiber Bragg Grating Biosensor 1064 nm High-Power Broad Area Semiconductor Lasers with Electrode Pattern High Performance 785 nm Wavelength Super-Luminescent Diodes Research of Angled 8° Integrated 808 nm Wavelength SLDs 808 nm Semiconductor Lasers with Tailored Gain for Mode Shape Influence of Gain Dispersion on the Propagation Characteristics of Ultrashort Optical Pulses in Distributed Fiber Amplifiers Chapter 12: Sustainable Materials and Applications High Performance Precast Wall Panels with Shear Transfer Provided by Carbon Fiber Grid The Study on the Electrolyte Behavior of Aromatic Polyesters from Diphenolic Acid and Isophthaloyl Chloride Effect of Sol-Gel Method for Medium Steel Phosphating Coating of Electrochemical Behavior Enhanced Electrokinetic Removal of Heavy Metals in MSWI Fly Ash Assisted by Cation Exchange Membranes Pechini Sol-Gel Fabrication and Luminescent Properties of Lu2SiO5: Ln3+ (Ln=Tb,Ce) Thin Films The Effect of Silver Ion Catalysis on Bioleaching of Chalcopyrite Tailings The Viscosity Measurement of Polyethylene Glycol Dilaurate First Principle Investigation of O2 Adsorption on the LaMnO3 (001) Surface An Analysis on Technology and Product Quality Effect of II-Powdery Emulsion Explosives The Application of Air-Space with Mixed Emulsion Explosive in Open-Pit Mines Modification of Asphalt by Montmorillonite Chapter 13: Sustainable Power and Applications Refrigerant Capacity and Magnetocaloric Effect on LaFe11.1Co0.8Si1.1BX Alloys Effects of Mg Substitution on the Thermoelectric Properties of Ca3Co4O9-Based Materials Calculation and Analysis on PM Thermal Characteristics Influence Performance of PMSM Based on FEM The Trend Change of Bitumen Research: A Text Mining Analysis (2000-2010) Design and Experimental Research of Solar Powered Water Pump System Based on Single Chip Marine Growth Effect on the Vibration Characteristics of Offshore Wind Turbine with Jacket Foundation Computer Simulation of Icing on NACA0015 Blade Airfoil for Vertical Axis Wind Turbine Numerical Simulation on the Static Torque Performance of Vertical Axis Wind Turbine with Different Blade Airfoils An Improved Differential Evolution Algorithm for Dynamic Economic Dispatch of Power Systems Optimal Design of the Vibration Device of Block Making Machine Analysis on Proportion and Development of Steel Workers’ Hospitalization Costs Analysis of Steel Industry Workers Abridged Life Table Integrated Automation Monitoring System in the Application of 220kV Substation Application of GM (1, N) Model on Slope Stability Analysis in Open Pit Mine Chapter 14: Sustainable Power Policy and Management Research on Energy Consumption of Screw Compressor under Load/Unload Analysis of Energy Consumption Efficiency Based on DEA-Tobit The Design of a Central Air Conditioning System for a Rebuilt Commercial Building Analysis of Total Factor Energy Efficiency of Manufacturing Industry in Shandong Province Based on Malmquist Index Empirical Study Study on Power Load Forecasting Base on Grey Prediction Model by Slip Average Method Research on Implementation Strategies of Green Supply Chain Management Study on Green Supply Chain Management Based on Circular Economy Decoupling Analysis of Economic Growth and Total Primary Energy Supply for the BRICS: 1971-2008 Comparative Study on Carbon Emission and Energy Consumption of the Textile Industry in Henan Province


Best Sellers


Product Details
  • ISBN-13: 9783038135449
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • ISBN-10: 3038135445
  • Publisher Date: 08 Aug 2011
  • Binding: Digital download and online
  • No of Pages: 820


Similar Products

How would you rate your experience shopping for books on Bookswagon?

Add Photo
Add Photo

Customer Reviews

REVIEWS           
Click Here To Be The First to Review this Product
Green Power, Materials and Manufacturing Technology and Applications
Trans Tech Publications Ltd -
Green Power, Materials and Manufacturing Technology and Applications
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Green Power, Materials and Manufacturing Technology and Applications

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book
    Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!