The present work addresses every aspect - from experiment to modelling - of the physical metallurgy of aluminium alloys; with particular emphasis being placed on processing, microstructures and final properties. The entire gamut of material applications is covered here, including transportation, packaging and building, and all Al-based materials are considered, such as Al-Li alloys, laminates, composites, and ultrafine structures prepared using conventional or novel techniques.

Table of Contents:
Preface On the Birth of GP Zones Modelling of As-Cast Structures Microstructural Control during Processing of Aluminium Canning Alloys Dynamics of Recovery and Recrystallization Precipitation and Strengthening in Aluminium Alloys Strengthening Mechanisms in AL Alloys - an Overview of Natural Limits and Engineering Possibilities Characterisation and Modelling of the Plastic Behaviour of Aluminium Alloys Recent Advances in the Environment Sensitive Fracture Mechanisms of Aluminium Alloys Corrosion and Filming Behaviour of Aluminium and its Alloys Modelling as a Tool in Alloy Design for Weldability Rational Procedures for Materials and Process Selection in Mechanical Design Applied to Aluminium Alloys Instantaneous Evaluation of Inclusion Quantity of Liquid Aluminium Alloys Removal of Transition Metal Impurities in Aluminium Melts by Boron Additives Vacuum Degassing of Aluminium Alloys Interaction Between Porous Graphite Substrate and Liquid or Semi-Liquid Aluminium Alloys Containing Titanium Particle Collisions and Inclusion Removal in Molten Aluminium: A Numerical Simulation In Situ Study of Liquid Al-Mg Alloys Oxidation Rosettes in Al-Cu-Mg-Si Aluminium Alloys Eutectic Melting in Al-Cu-Mg-Si Alloys Directional Solidification of Al-Si-Cu-Mg Alloys Microstructure of a Rapidly-Solidified Al-12wt%Si Alloy Peculiarities of Ti Dendritic Segregation in Aluminium Alloys The Effect of Cumulative Alloying Additions on Intermetallic Phase Selection in Alloys Based on Al-0.5 wt.%Fe Al-7Si-0.3Mg Cast Alloy: Formation and Crystal Structure of ß-FeSiAl5 and (Be-Fe)-BeSiFe2Al8 Phases Solidification of Al-7Si-2Ti-2Ce Alloy Ribbons Solidification Processing and Microstructure Analysis of Synthetic Al-Si Alloys La Modification de la Structure et les Propriétés Mécaniques des Alliages Al-Si Hipereutectiques par Microalliage à P, à Ti+B ou à Mischmetal Transient Nucleation Effects on Extension of Solid Solubility in Al-Ti and Al-Zr Alloys Modification of Interdendritic Convection by a Magnetic Field The Study of Some Al-5%Ti and Al-5%Ti-1%B Master Alloys Al-Ti-B Grain Refining Alloys from Al, B2O3 and TiO2 The Grain Refining Action of TiB2 and TiC Particles Added to Aluminium by a Stir-Casting Method The Effect of Grain Refinement on the Fluidity of Aluminium Alloys Laws of Fluidity Variation for Aluminium Alloys of Al-Cu-Mg - System Influence of Filling Speed and Solidification Pressure on Macrosegregation in Squeeze-Casting Solidification of Al-7%Si-0.3%Mg Alloy in Sheared Flow Conditions: Preliminary Experimental Results Determination of the Solidification Chracteristics of the A356.2 Aluminum Alloy Optimization of the Compositions of the High Strength Casting Aluminium Alloys Aluminium Casting Alloys with High Content of Zirconium Melt Drag Process with Improved and Controlled Cooling System by Forming Belt Modelling of Thermomechanical Effects during Direct Chill Casting of AA1201 Aluminium Alloy Laminate Made from Rapidly Solidified Foils by The Rotating Drum Method Multilayer Spray Forming Process and Setup Rheocast Microstructure of a Usually Wrought Aluminium Alloy Thixoforming of Electromagnetically Elaborated Aluminum Alloys Slurries and Semisolid Metal Matrix Composites Interface Study in Electromagnetically Rheocast SiC Reinforced Al-Li Alloy Matrix Composites Effect of Processing on the Microstructure and Tensile Properties of A356/SiCpMMCs Solidification Simulation of Equiaxed Grains in Al - Si Eutectic Alloys Fabrication of Metal Matrix Composite by Spontaneous Infiltration and Subsequent In Situ Reaction Processes Investigations on the Production of Al-NbAl3 Composites Microstructural Defects in Thin Sheet Twin Roll Cast Aluminium Alloys Effect of Multipass Hot Deformation on Recrystrallisation Kinetics, Strength and Softening of Al-1Mg during Thermomechanical Processing Static Recrystallisation on Al-1Mg during Thermomechanical Processing Laboratory Simulation of Breakdown Rolling of AA3104 Computer Assisted Metallurgy for Non Heat Treatable Aluminum Alloys Optimisation of Mg2Si Phase for Extrudability of AA 6063 and AA 6005 Alloys Microstructure Control during Extrusion with Respect to Surface Quality Temperature Measurements in Extrusion Dies Considerations about the Plastic Deformation through Warm Extrusion of Al-Li Based Alloy of 2090 Type Isotropic Wrought Aluminum-Lithium Plate Development Technology Mechanisms of Surface Deformation during Cold Rolling of Aluminium Kinetics and Microstructural Aspects of Recovery in Al, Al-Mg and Al-Mn Alloys Recrystallization during Hot Deformation of Aluminium Characterization of Deformation Microstructures in Commercial Purity Aluminium Physically-Based Modelling of Strength, Microstructure and Recrystallisation during Thermomechanical Processing of Al-Mg Alloys The Influence of Transient Deformation Conditions on Strength, Microstructure and Recrystallisation during Thermomechanical Processing of an Aluminium Alloy Al-1% Mg Particle Stimulated Nucleation during Continuous Annealing of a Cold Rolled AA 5182 Alloy Recrystallization in a 6000-Series Automotive Sheet Alloy during Solution Heat Treatment Practice Recrystallization Textures and Plastic Anisotropy in Al-Mg-Si Sheet Alloys The Effect of Small Particles on Annealed Grain Size and Texture of Al-Mg-Si Alloys The Deformation and Recrystallization of Particle-Containing Single Crystals Recrystallization Texture of Al-Fe-Ce Alloys Recrystallization of Al-3Mg and Al-3Mg-0.2Sc Alloys The Influence of Particle Distribution on the Recrystallization of Al-4% Cu Alloys Microstructural Characterization of a 7010 Alloy after hot Deformation and Solution Treatment The Motion of High Angle Grain Boundaries in Al and Al-Alloys Combined In-Situ Annealing and EBSD of Deformed Aluminium Alloys Anisotropy of Dynamic Grain Growth in a Superplastic Aluminum-Magnesium Alloy Geometry and Physical Properties of Grain Boundaries and their Effect on Strength of High Purity Aluminium The Influence of Deformation Temperature and Strain Rate on the Plane Strain Compression Textures of Al-1%Mn-1%Mg Texture and Structure Evolution in AlMn and Commercial Purity Aluminium Deformed by Monotonic and Reversed Hot Torsion Texture Variations through the Thickness of AA3004 and its Effect on Earing Behaviour Evolution of Microstructure and Texture in Al 99 / 99 - Foils for High Voltage Electrolytic Capacitors Influence of Hot Band Texture on the Development of Cold Rolling and Recrystallization Texture in Aluminium Foils Effect of Hot Rolling Texture on the Formation of the (111) Recrystallization Texture in Al-Mg Alloys Growth of Cube Texture in Nominally Pure Aluminum with Fine Particle Dispersion Recrystallization and Texture of AA6060 Extrusions Produced from Billets Containing Feather Crystals Diffraction Imaging of the Grain Structure and Texture of Aluminium Alloys using High Energy Synchrotron X-Rays at the E.S.R.F. Energy Dissipation Efficiency Analysis and Microstructural Mechanisms in Aluminum High Temperature Plane Strain Compression of an Al-1%Mg Alloy Evolution of Grain Structure in Hot Torsion of Al-5Mg-0.7Mn (AA5083) Measurement of Mean Slip Distance in Aluminum and its Correlation to Ductility Microstructural Control by Thermomechanical Processing in Hot Worked Al-Li Alloys Influence of Zr Addition on the Microstructure and Properties of PM Al-8Fe-4Ni Alloy On Precipitate-Induced Anisotropy Modeling in Binary Al-Cu Alloys Earing and Texture Evolution in Al Can-Sheet The Anisotropy and Texture of Al-Li Alloys Texture and Mechanical Anisotropy of 6082 Al Alloy Samples Subjected to Extrusion and Rolling Applications of Thermodynamically Modelled Phase Diagram Data in Mathematical Modelling of Industrial Processes Phase Diagram Calculations for Commercial Al-Alloys Thermodynamics and Precipitation in 8090 (Al-Li-Cu-Mg-Zr) Alloys Studied by DSC and TEM Nucleation of Phases in Al-Fe-Si Alloys Diffusion of 3d-Transition Elements in Aluminium APFIM/TEM Observations of a High Strength-Creep Resistant Al-Cu-Mg-Si-Ge Alloy Tomographic Atom Probe Study of Age Hardening Precipitation in Industrial AlZnMgCu (7050) Alloy Atomic Analysis of Guinier-Preston Zones in Al-1.7 at% Cu Classification of Metastable Phases in Al-Mg2Si Alloys by HRTEM The Composition of Fine-Scale Precipitates in Al-Mg-Si Alloys Cluster-Based Models for the Crystal Structure of the Hardening Precipitates of Al-Mg-Si Alloys d' Heterogeneous Nucleation on Dislocation Networks in Al-Li Influence de Cd sur la Cinetique de Formation des Zones GP et la Precipitation ?' dans Al-Ag Prediction of Time for Solution Heat Treat The Growth Path of Particles during Steady-State Coarsening Microstructural Reactions Occurring during Homogenisation of AA1050 Alloy Precipitation in an Al-Cu-Mg Alloy Containing Trace Addition of In Investigation on Phase Transformations during Ageing in an AlCuMgAgZn Alloy The Precipitation Behaviour of High-Purity Al-Mn Alloys Precipitation of Excess Silicon during Heat Treatment of Cast Al-7wt%Si-0.4wt%Mg Alloy Precipitation and Age-Hardening in Al-Si-Cu-Mg-Fe Casting Alloys The Effect of Quench Rate on Mechanical Properties of 319 Aluminum Alloy Castings Precipitation Strengthening and Mechanical Properties of Hypereutectic P/M Al-Si-Cu-Mg Alloys Containing Fe and Ni Precipitation Kinetics of an Al-15% Mg Alloy Studied by Microcalorimetry and TEM Study of the Precipitation Kinetics in a 6000 Series Automotive Sheet Material High Resolution Transmission Electron Microscope Observation of the Metastable Phase in an Aged Commercial AA6063 Precipitation Behaviour of AI-Mg-Si Ternary Alloys Effect of Pre-Aging Temperature on the Behavior in the Early Stage of Aging at High Temperature for Al-Mg-Si Alloy Effect of Cold Rolling and Aging Treatment on Mechanical Property and Precipitation Behavior in a Al-Mg-Si Alloy Study of the Mg2Si Phase in a 6063 Al Commercial Alloy Using Dilatometric Techniques Low-Temperature Precipitation of Al-Li-Cu Alloys Containing Additional Elements The Effect of Scandium on the Structure of Precipitates in AlLiCu Alloys Hydrids Forming in Al-Li Alloys Ageing Behaviour and Tensile Properties of 1460 Alloy Phase Transformations and Heat Treatment Regimes of Commercial Aluminum Alloys The Influence of Double-Ageing on the Short-Transverse Elongation of AL-Li-CU-ZR Rolled Plate TEM Studies of the Precipitation in High Zr Spray Formed Al-Li-Zr The Effects of In, Mg, and Impurity Trace Additions on Precipitation, Anisotropy, and Related Properties in an Al-Cu-Li Alloy Precipitation Study in a Commercial 8011 Alloy Precipitation Processes Controlled by Lattice and Grain Boundary Diffusion in Al-15at.%Ag Effects of Si and Ti Additions on the Nucleation and Phase Stability of the L12-Type Al3Zr Phase in Al-Zr Alloys Precipitation of NI in AL-0.02 AT% NI Alloy Accelerated Aging Processes in SiC/7020 Aluminium Composite Processing of Aluminum Powder Metallurgy Alloys Containing Self-Propagating Reaction Products Internal Oxidation in Mechanically Alloyed Al-Mg and Al-Li Alloys with Addition of Metal Oxide Microstructure and Mechanical Properties of Three Dispersion Strengthened Aluminium Base Alloys after Extended Holding at Elevated Temperatures Microstructures during Solutionizing and Aging in a 6061 Aluminium Alloy Matrix reinforced with Alumina Particles Analysis of Spatial Arrangement of Particles in thin Foil of Al-Al4C3 Composite Long Term Thermal Stability of Silicide Dispersoids in Rapidly Solidified Al-Fe-V-Si and Related Alloys Characterization of the Non-Linear Elastic Properties of Aluminium Alloys Using Ultrasonic Evaluation under Load Interface Damping Capacity of Al-Li Alloy with Surface Plating Ti Kanzaki Forces and Nonuniform Static Displacements in Dilute Aluminium-Carbon Solid Solutions Thermal Expansion and the Solid to Liquid Transformation of Al-Mg Alloys: A New Approach to its Analysis The Effects of Second Phase Particles, Dislocation Density and Grain Boundaries on the Electrical Conductivity of Aluminium Alloys Electrical Conductivity of Aluminium Alloys Inhomogeneity of Mechanical and Electrical Properties of Al-Li-Based Alloys Extrusions Application of Solution Temperature - alculated Resistivity (T-?) Diagram Obtained from Binary Solubility Curves to Al-Zr Alloys Constitutive Modelling of Alloys Implementing Metallurgical Variables Microstructure-Based Models of the Plastic Behaviour of 3104 Aluminium Alloy An Investigation of the Properties of an Al-Mg-Li-Zr Alloy after Equal-Channel Angular Pressing The Portevin - le Châtelier Effect in an AlZn10 Alloy investigated by the Acoustic Emission Technique Critical Conditions for Portevin-Le Châtelier Instabilities in Al-4.8%Mg and Al-2.57%Mg Alloys Formation of Lüders Lines in Al-Mg Alloys The Effect of Shear Banding on Spatial Arrangement of the Second Phase Particles in the Aluminium Alloy Micromechanism of Serrated Flow in Al-Li Single Crystals Deformation Instabilities in Al-Li Based Alloys Aging Influence on Serrated Flow Behavior in Al-Li Single Crystals Mechanical Characteristics of A.A. 8090-T8 Plate with Microstructural Gradients Microstructural and Thermal Analysis of A.A. 8090 Plate Alloy with Crystallographic Texture Gradient Quench Sensitivity and its Effects on Mechanical Properties of 8090 Al-Li Superplastic Sheets Effect of Alkali Metal Impurities on the Low Temperature Thermal Stability of 2090 Al-Cu-Li Alloys Through Thickness Property Variations in 7050 Plate Particulate Fracture during the thermomechanical Processing of SiCp/Al Metal Matrix Composite Optimisation of the Thermomecanical Processing Parameters of Al/SiCp Composites Strain Rate Dependence in 6061 and 2024 Aluminium Matrix Composites Fabrication of Composite Materials by Mechanical Alloying with Cutting-Chip of Al-Mg-Si Alloy and Fine Al2O3 Powder Thermal Residual Stresses and their Effect on Mechanical Properties in SiCp Reinforced Al Matrix Composites Finite Element Analysis of Deformation Behavior and Local Damages in Al Matrix-SiC Particulate Composite Microstructures Improvement of Mechanical Properties by RRA Treatment in Al-SiCw Composite Elevated Temperature Performance of Particulate Reinforced Aluminium Alloys The Effect of Reinforcement Reactions on the Structures of Al-Si Based Metal Matrix Composites Influence of Fibre Reinforcement on the Aging Behaviour of AlSi12CuMgNi Alloy Structure et Propriétés Mecaniques d'un Matériel Composite à Matrice Métallique du Type AlSi7Mg/Al2O3 p Hot Deformation and Dynamic Recrystallization of SiCw/AA2124 Composites High Strain Rate Superplasticity and Mechanical Properties after Superplastic Deformation of Ma 2024Al-SiC Particulate Composites Deformation Kinetics and Microstructure during Hot Torsion of Al99.9, Al-11Zn, Al-1Mn, Al-5Mg, Al-5Mg-0.6Mn, Al-5Mg-0.6Mn-1Fe Effect of Microstructure on the Hot Deformation Characteristics of Aluminium Alloys Effect of Small Amount of Lithium on Hot Ductility of Al-Mg Base Alloys On the Influence of 0.5wt.% of Cu on the Hot Ductitity of an AA 5182 Al-Mg-Alloy Hot Ductility of Some Al-Mg-Si Alloys Hot Working of Heat Resistant Rapidly Solidified Aluminum Alloy 8009 High Temperature Deformation Behavior of a 7475 Al Alloy Ductility and Rheology of an Al-4.5% Cu Alloy from Room Temperature to Coherency Temperature Behaviour of Selected Aluminium Alloys in Cold and Hot Forging The Influence of Hot-Working and Ageing on Notched-Strength and Ductility of Aluminium Alloy AA6082 Influence of Strain Path and Initial Microstructure on the Work Hardening Behaviour of a Al-Mg-Mn Alloy Effects of Pre-Stretching and Aging Process on Tensile Properties of 2195 Al-Cu-Li Alloy Effect of Trace Ag and Mg Additions on Mechanical Properties and Microstructures of 2195 Alloy Microstructural Stability under Creep Conditions of Two Al-Cu-Mg-Ag Alloys Effects of Si Additions on the Precipitation Hardening Response in Al-Cu-Mg(-Ag) Alloys The Effect of Precipitate Shape and Orientation on Dispersion Strengthening in High Strength Aluminium Alloys Precipitation Kinetics and Strengthening in AlMgZnCu Alloys Precipitation Behaviors of ß-Phase and Changes in Mechanical Properties of AL-MG System Alloys Effect of Precipitation Structure on the Work Hardening Process in a Medium Strength AlZnMg Alloy Effect of Process Parameters on the Ageing of an Al-6% Zn-2.3% Mg Alloy The Effect of Deformation Prior to Artificial Ageing on the Ageing Characteristics of a 7475 Aluminum Alloy Precipitation and Work Hardening in High Strength AlZnMg(Cu,Zr) Alloys Retrogression and Reageing Treatment of an Al-8Zn-2.2Mg-2.2Cu Alloy Some Aspects of Precipitation Hardening in Aluminum Alloy 6056 T6 - T.E.M. Experiments - Strengthening Behavior of Al-Li-Mg Single Crystals Embrittlement in Recrystallised and Unrecrystallised Al-Li Binary Alloys Influence of Ce on the Microstructure and Properties of Al - Li Alloy Improvement of Physical Properties for Al-1.1 % Mn Alloy with Taguchi Method Formability of Aluminium Sheets in Pulsatory Straining Fatigue of Eutectic Al-Si Alloys Inhomogeneity of Mechanical and Fatigue Properties of Al-Li Alloys Extrusions Fatigue Deformation Characteristics of Aged Aluminium Lithium Alloys at Elevated Temperature Low-Cycle Fatigue Behaviour of the Model Al-Li-Zr and Al-Li-Cu-Zr Alloys Fracture and Fatigue Crack Growh Resistance of Recrystallized AL-LI Alloys Effects of Delamination on the Transient Fatigue Crack Growth Behaviour Following Overloads in 8090-T8 Al-Li Alloys Non-Propagating Fatigue Crack Behaviour in Al 2024-T351 Dynamic Fracture Characteristics in Aluminum Casting Alloy Influence of Surface Quality on Fatigue Behavior of Al-Si7Mg Type Alloys Effects of Fe and Ca on Usual and Impact Fatigue Characteristics of AC2B - T6 Aluminum Casting Alloy Modeling of Fatigue Damage Mechanisms of 7010 Aluminum Alloy A Review of Fatigue of Aluminium Matrix Reinforced by Particles or Short Fibers Use of Internal Variable Models to Predict the High Temperature Behaviour of a 6xxx Industrial Alloy Creep - Fatigue of Dispersion Strengthened Aluminum Al - Al4C3 Assessment of the Creep Response of New Powder Metallurgy - Rapid Solidification Al-Si-Ni-Cr and Al-Si-Cu-Fe Alloys Short Crack Growth in 1441 and 1450 Al-Li Alloys Microstructure and Damage Mechanisms in A356-T6 Alloy Modelling of Damage due to Particles and Grain Boundaries Microstructural Aspects of the Damage Mechanisms of Cast Al-7Si-Mg Alloys The Stabilizing Effect of Strain Hardening during Superplastic Deformation Evaluation of Damage in MMC's by Acoustic Emission Technique Effect of Impurity Hydrogen on the Void Formation Prior to Fracture in Aluminum Effect of Processing on the Fracture Characteristics of A 6092 Al Composite Reinforced with SiCp Cavity Nucleation and Fracture in an Al-Si-Ge Alloy A Model to Predict the Fractal Dimension of Fractured Surfaces of 7075 Aluminium Alloys Based on Koch's Fractal Curve and Mechanical Properties Extrinsic Toughness Mechanisms of Al-Li Alloys 2090 and 2090+Ce Effect of Stress Triaxiality on Fracture Behaviour of Al-Li System Alloy The Tensile Strength and Fracture Behavior of Partially Solidified Aluminum Alloys STM Observation of Grain Boundaries in Al-Mg2Si Base Alloy Deformed at Room Temperature Effect of Constituents and Dispersoids Morphology on Fracture Toughness and Fatigue Crack Propagation Rate in 2024 Aluminum Alloys Effect of Recrystallization in Al-Mg-Li-Cu Alloy Sheets Embrittlement Phenomena in the HAZ of Al-Zn-Mg Weldments Anisotropy of Mechanical Properties in 7010 Aluminium Thick Plates Microstructural Modelling of Fracture Toughness of Al Alloys In Situ Investigation of Crevice Corrosion by Electrochemical Noise Analysis A Ten-Step Mechanism for the Pitting Corrosion of Aluminium Susceptibility to Pitting Corrosion of Pure Aluminium, 2024 Alloy and 6056 Alloy in Chloride-Containing Sulphate Solutions Electrochemical AC Etching of Aluminum Foils in Hydrochloric Acid Electrolytes Corrosion Behaviour of Aluminium Matrix Composites Containing Silicon Carbide Particles Evaluation of Corrosion Resistance of Aluminium-Copper-Graphite Particulate Composites From Microstructural Information to the Prediction of Environmental Cracking Corrosion and Stress-Corrosion of 7XXX-W Products Mechanical Properties and Corrosion Behavior of Extrusions for Aircraft Applications Made by Discontinously Silicon-Carbide-Reinforced Aluminum Matrix Composites Effect of Frequency on Fatigue Crack Propagation Behavior of the Aluminum Alloy 6013 in Corrosive Environment Comparison of Crack Growth Behaviour Between Spray-Formed and Commercial Plate Al-Zn-Mg-Cu Alloy 7150 Liquid Metal Induced Degradation of Alloy 7010 The Influence of Constituent Particles on the Quality of Hard Anodic Coatings on Fully Heat Treated AA 7075 Extrusion Products Infrared Radiation Properties of Anodized Aluminum Effect of Degreasing Treatments on the Passivity of Pure Aluminium Sheet Effects of Cold Working and Thermal Exposure on the SCC Behaviour of AA5182 Alloy Sheet Cerium Pretreatments to Prevent Filiform Corrosion of Painted Aluminium Alloys Water Atomized Powders of Aluminium and its Alloys Wear Resistant Surface-Modified Aluminum Alloy Surface Modification of Aluminum Matrix Composites by Electrical Discharge Alloying Structure and Chemical Composition of Lamellae in Sputtered AlSn20 Films La Fabrication et les Propriétés Tribologiques des Composites des AlSi-Pb(particules) Laser Welding of Aluminium-Magnesium Alloys Sheets Process Optimization and Welds Characterization Weldability of commercial AL-CU-LI Alloys Nondentritic Equiaxed Zone Formation in Aluminum-Lithium Welds Joining Efficiency of Superplastic 8090 Al-Li Thin Sheets Using Electron or Laser Beam Welding Mechanistic Studies of Brazing in Clad Aluminium Alloys Development in Microstructure during Brazing of 6013 Alloy Development and Properties of Thixotropic Brazing Alloys Based on the Al-Ge System The Effect of Microstructure on Flow Behaviour of Braze Clad Material Fatigue Properties of Welded T-Joints in Thin-Walled Aluminium Profiles Crushing Behaviour of Aluminium Square and Rectangular Tubes Welding Distortion of Aluminium Structural Members Features of AL Laminate Behaviour At Fatigue Loading Development of High Strength Al-Mg-Si-Cu Alloy with Corrosion Resistance After Concorde: Evaluation of an Al-Cu-Mg-Ag Alloy for Use in the Proposed European SST The Effect of Cu and Mg Content on Mechanical Properties of Al-Cu-Mg Alloys with and without Ag Additions High Strength Damage Tolerant Al-Cu-Mg-Ag Forging Alloy for Use at Elevated Temperatures Comparison of the Thermal-Mechanical Stability of Three Al-Cu-Mg-X Alloys Influence of Excess Si on Strength and Toughness in Al-Mg-Si Alloys Properties of Bake Hardenable Al-Mg-Cu Alloy Sheets X6030, A New Lead-Free Machining Alloy The New Aluminum Alloy AA 6069 The Development of Aluminium Alloy AA7032 for High Pressure Gas Cylinders Development and Application of High-Strength Al-Zn-Mg-Cu Alloys The Properties and Structure of High-Strength Aluminium 1933 Alloy Forgings Development of Super-High Strength Al-Zn-Mg-Cu P/M Alloys Mesoscopic Structure of Super-High Strength P/M Al-Zn-Mg-Cu Alloys Correlation between Microstructure and Mechanical Properties of Al-Mg Alloys without and with Scandium On Prospects of Application of New 01570 High-Strength Weldable Al-Mg-Sc Alloy in Aircraft Industry Alloying Components Optimization of Weldable Al-Li-Mg Alloy Production of Hypereutectic Al-Si Alloys by P/M Route P/M MMC's Base Aluminum Reinforced with Ni3Al Intermetallic Made by Mechanical Alloying Route Processing-Microstructure-Mechanical Properties of an Al-Cu/SiC Metal Matrix Composite Synthesized using Disintegrated Melt Deposition Technique Mechanical Property Evaluation of Aluminium-Copper-Graphite Particulate Composites Ain Dispersion Reinforced Aluminum Matrix Composite Mechanical Properties of Particle Stabilized Aluminum Foam Microstructures and Mechanical Properties of Mechanically Alloyed Al-Al3Ti Alloys