About the Book
Collection of selected, peer reviewed papers from the 2014 International Conference on Applied Sciences, Engineering and Technology (ICASET 2014), July 28-29, 2014, Qingdao, China.
The 393 papers are grouped as follows:
Chapter 1: Materials Science and Technology, Chemical Engineering,
Chapter 2: Biomaterials, Medicine, Biotechnologies and Pharmaceutics,
Chapter 3: Industrial, Dynamics, Mechanical, Manufacturing Engineering and Processing, Measurement and Instrumentation,
Chapter 4: Products and Systems Design, Modelling and Simulation, Intelligent Automation and Control Systems,
Chapter 5: Signal and Image Processing, Intelligent Recognition, Intelligent Algorithms and Methods, Сomputational Mathematics,
Chapter 6: Information Technology and Networks Applications, Data Management and Software, Internet and Communications Technologies,
Chapter 7: Environmental Engineering and Resource Development,
Chapter 8: Management, Economics, Social, Logistics and Engineering Management,
Chapter 9: New Technologies in Engineering Education and Teaching
Table of Contents:
- Preface, Conference Organization and Acknowledgement
- Chapter 1: Materials Science and Technology, Chemical Engineering
- The Nature of Silanol Groups on the Surfaces of Silica, Modified Silica and Some Silica Based Materials
- Research on Silver-Plated Fiber / Acrylic Blended Yarn and Fabric Antistatic Performance
- Synthesis of a Polysiloxane with High Reaction Activity
- A New Molecularly Imprinted Polymer Prepared by Surface Imprinting Technique for Selective Adsorption towards Rhodamine B
- Analysis of the Relationship between Desulfurization Treatment and Green Chemistry of Coal
- Carbon Nanotube Network in Polymer Nanocomposites: Rheology and Flammability
- Corrosion Fatigue Crack Propagation of 6151-T6 Aluminum Alloy Based on Virtual Crack Closure Technique
- Determination of Rhodium in Waste Rhodium-Loaded Carbon Catalyst Samples Using Teflon Pressure Vessel-Assisted Sample Digestion and ICP-AES
- Effect of Anodic Films on Galvanic Corrosion Behavior of TC4 Titanium Alloy and LY12 Aluminum Alloy
- Effect of LPC on the Corrosion Behavior of AZ81 Magnesium Alloy
- Effect of TGA Concentration on Morphology of Cu2S Nanoparticals
- Enhanced Dispersion Strengthening of Sm in Mg-10Y-0.5Sm Alloy
- Facile Synthesis and Luminescence Properties of Gd2O3:Eu3+ Hollow Spheres
- Fracture Analysis of 6A02 Aluminum Alloy Subjected to Corrosion Fatigue Damage
-
In Situ Self-Assembled Graphene-Polyaniline Nanocomposite Thin Films for Ammonia Gas Sensor
- Measurement of Passive Rubidium Frequency Standard Left Field and the Assessment of the Impact of Frequency Stability
- One-Pot Synthesis of a Novel 3D CuO Microstructure with Excellent Electrochemical Hydrogen Capacity
- pH Tunable Turn on and Turn off Quantum Dots Conjugated with Poly(2-(Dialkylamino)ethyl Methacrylate)
- Photooxidation Activity of Mixed Phase TiO2 Nanoparticles
- Research on Decision-Making of Fine Chemicals’ Extension
- Research on Electrical Characteristics of Metal Rubber
- Study on the Carbon Doping of Sugar Added MgB2 Superconductors Prepared by Low Temperature Sintering
- Synthesis and Self-Assembly Study of Biodegradable Amphiphilic Triblock Copolymers with PEG Block
- Synthesis, Photophysical Properties and Photoinduced Intermolecular Electron Transfer of a Novel Aryl Benzyl Ester Dendritic Axially Substituted Silicon (IV) Phthalocyanine
- Temperature Monitoring on Microwave Curing of DGEBA E-51 and 4,4’DDM System
- The BPG Property of Photonic Crystal for TE Mode with Sector Pillars as Scatterers
- The Fabrication of Nanometer- and Micrometer-Sized Silica Hollow Spheres
- The Investigation of Microstructure Silicon NH3 Gas Sensors Based on Polyaniline Nano-Thin Films
- The Structure and Electrical Property of sp2 Rich Carbon Films by Magnetron Sputtering
- Theoretical Investigation on the Role of Amine Bases in Stabilizing the Key Intermediate of Proline Enamine Carboxylate in Proline-Catalyzed Asymmetric Reactions
- Well-Defined BaWO4:Dy3+ Luminescent Materials: Hydrothermal Synthesis and Luminescence Properties
- The Study of Brush Plating Process on Polyamide Engineering Plastics Surface
- Research on Preparation and Properties of Textile Materials Deposited with Nanostructured Titanium Oxide
- Ionization Cross Sections by Electron Impact for Single Ionization from the Atomic Ground State
- Chapter 2: Biomaterials, Medicine, Biotechnologies and Pharmaceutics
- Determination of Vitamin C Content in Brown Rice by Capillary Zone Electrophoresis
-
In Vitro and In Vivo Antitumor Efficacy of Curcumol Nanosuspension against H22 Tumor
-
l-Stepholidine Blocks Methamphetamine-Induced Locomotor Sensitization in Mice
- 20(S)-Ginsenoside Rg3 Inhibits Human Glioma Cell Growth through the Suppression of Voltage-Gated K+ Channels
- 2Hz-Electroacupuncture Attenuates Conditioned Cue-Evoked Heroin-Seeking Behavior and Increase CB2-Rs Expression in Relapse-Relevant Brain Regions in Heroin-Addicted Rats
-
l-Stepholidine, a Naturally Occurring Dopamine D1 Receptor Agonist and D2 Receptor Antagonist, Attenuates Methamphetamine Self-Administration in Rats
- Analysis of Factors and Characteristics in Patients with Hand-Foot-Mouth Disease
- Aneuploidy Alnus formosana Selection and ISSR Analysis
- Anti-Tumor Effects of a Newly Cloned Serine Protease from the Marine Annelid, Arenicola cristata
- Application of Carbon Nanoparticles as Fluorescent Quenchors in Biochemistry
- Application of Ultrasonic Treatment on Collecting Recombinant Protein from Yeast
- Biodistribution and Toxicity Study of Titanium Dioxide Nanoparticles of Different Sizes after Intravenous Injection in Mice
- Cardioprotective Effects of Aqueous Extract of Salvia miltiorrhiza on Heart Failure is Related to SDF-1/CXCR4 Axis and Bcl-2 Family Expressions
- Cloning and Activity Analysis of a New Protease from Arenicola cristata
- Cloning and Expression of a Novel Protease with Fibrinolytic Activity from Arenicola cristata
- Computational Modeling of the Patient-Specific Femoral Head before and after the Treatment
- Determination of Fluoride in Antarctic Krill by Ultrasonic Extraction and Ion Chromatography
- Determination of Vitamin C Content in Saposhnikovia Divaricata by Capillary Zone Electrophoresis
- Effects of Echinomycin on PCNA-Dependent Follicular Development in PMSG-Induced Sprague-Dawley Rats
- Effects of Immediate Stimulation on Single Nucleotide and Catecholamine Level in Chinese Tree Shrews
- Effects of Self-Assembling Peptide RADA16-І Hydrogel on Neural Differentiation of Bone Marrow Mesenchymal Stem Cells
- Exercise Induce HO-1 Expression in Skeletal Muscle and Improve Sports Ability of Mice
- Expression of a Fusion Protein of Human Proinsulin with Glutathione-S-Transferase in Escherichia coli
- Foxp3 in Lewis Lung Cancer Cells Enhances the Expression of TGF-β1 and IL-10
-
In Situ Imaging of Cancer Cell via Cancer Aptamer and its Fluorescent Clusters
- Inhibition of HIF-1α Signaling in the Ovaries of Sprague-Dawley Rats with Polycystic Ovary Syndrome
- IRE1a Negative Regulates Chondrocyte Differentiation
- Neuroprotection of Saponins from Rhizoma panacis majoris in Cerebral Ischemia/Reperfusion is Related to Nrf2-Mediated Antioxidant Response: Role of Nrf2 and Bcl-2 Family Expressions
- Optimum the Fermentation Condition to Produce the Polysaccharide of Hericium erinaceus with Tofu Whey
- PLK1 Promotes Invasion of Esophageal Squamous Cell Carcinoma Cells through Inducing Epithelial-Mesenchymal Transition
- Progress of Molluscan Nacre Proteins Research
- Protective Effects of 5,7,3’,4’-Tetramethoxyflavone on Proliferation of Rat Chondrocytes Induced by IL-1β
- Protective Effects of Quercetin Derivatives against Hydrogen Peroxide-Induced Oxidative Damage in PC-12 Cells
- Purification of Pomegranate Pericarps (Punica granatum l.) Extracts with Macroporous Resins and Evaluation of Antioxidant Activities In Vivo
- Simulate Efficacy of Vegetative Filter Strips Based on Coupling Model and its Application
- Simultaneous Analysis of 6 Trace Elements in Pomegranate (Punica granatum l.) Juice by ICP-MS after Microwave-Assisted Digestion
- Stem Cell-Like Characteristics of Corneal Epithelial Cells
- Structure and Characteristics of Pineapple Leaf Fibers Obtained from Pineapple Leaves
- Study of Multi-b-Value Diffusion-Weighted Imaging at 3.0 T for Measuring Renal Function of Patients with Chronic Renal Failure
- Study on Compatibility of Self-Assembly Peptide RADA16-I, PLGA and PS Scafolds and BMSCs
- Study on Phenol-Degrading Characteristics of Hybrid Strains and Immobilized Cells
- Synthesis and Detection Experiments of a Biomolecule Detection Probe Based on Fluorescence Changes
- The Application of Case-Based Reasoning (CBR) in the Medical Management of Community Health
- The Application of High Throughput Microarrays in the Screening Active Ingredients of Traditional Chinese Medicine
- The Protective Effects of Probiotics on High Fat Diet-Induced Oxidative Damage Using a Comet Assay in Rats
- Ultrastructural Changes in Cultured Rat Alveolar Macrophage Cells Induced by Fine Particulate Matter
- Confocal Micro-Raman Spectroscopic Analysis of the Variants of the Erythrocyte in the Rare Earth Poisoned Rats
- Determination of Brucine in Strychnos by Capillary Electrophoresis
- Determination of Multi-Class Pesticide Residues in Lettuce and Cucumber by GC-MSD and the Degradation Study on Vegetables Simultaneously
- Establishment and Evaluation of Determination of Cinnamaldehyde in Baoyuanqingxue Granules by HPLC
- Extraction Procedure and Partial Characterization of Polysaccharide from Eucheuma gelatinae
- Study on Rheological Characterization of Uncured Natural Rubber with Different Initial Moisture Contents Dried by Microwave
- The Difference of Flavonoids and Phenolic Acids in Six Kinds Vinegar
- The Extracting Technique of Effective Materials from CTM Based on Phonochemistry
- Chapter 3: Industrial, Dynamics, Mechanical, Manufacturing Engineering and Processing, Measurement and Instrumentation
- Advances in Test Methods for Poisson’s Ratio of Solid Propellant
- Design of a Downhole Motor Drilling Experimental System
- Design of Steam-Heated Drying Line
- Dynamic Analysis of a 3-DOF Parallel Mechanism Based on Kane Equations
- Equipment and Technology Research of Ballast Water Treatments
- Experiment Research on Effect of Moving Flat Speed on Carding Force in Carding Machine
- Failure Analysis and Welding Repair for Water Wall Connection Tube Burst of SA210C Steel
- Investigation on Fully Mechanized Mining Technology of Thin Coal Seam under the Near Goaf
- Measuring Method and Device Microwave Cavity System Temperature Control Factor
- Modal Analysis of Crankshaft for Two-Stroke Marine Diesel Engine Based on Block Lanczos Method
- Modeling and Movement Simulation of Tractor-Semitrailer
- Numerical Investigation of Static and Dynamic Aerodynamic Characteristics for a Guided Projectile with Fin Slot
- Optimal Design of Working Face Ventilating System of Huoerxinhe Company
- Practical 4.4KW ZVZCS Full-Bridge Power Converter Design
- Research Based on CFD for Helical Intake Port Position Defect of Diesel Engines
- Research for PV Cell and Storage Battery of Dynamic Economic Dispatch in Micro-Grid
- Research on the Application of New Media Technology in the Micro-Film Products
- Research on the Processing Simulation of Whorl Milling Based on LISP
- Rolling Bearing Fault Diagnosis and Health Assessment Based on EMD–TEO
- Simulation and Experiment of Power Amplifier for Magnetic Bearings
- The Absolute Measurement Deviation of Rotational Averaging Mirror Surface Based on the Finite Element Method
- The Creation of Virtual Assembly System Based on Virtools
- The Development of a Highly Integrated Secondary Instrument
- The Motor Temperature Rise Test System Based on Magnetic Powder Dynamometer
- The Present Situation and Development Trend of Rapid Drilling Technology in Coal Mine Emergency Rescue
- Tri-Linear Regulation of Diffusion Tensor Field for WM Fiber Tracking
- Novel N-3 Compressor for Low-Power Booth Multiplier
- On Theoretical Models for Oil Droplets Size Distribution under the Influence of Surface Wave Breaking
- A Constructed PQ2 Chart for Calculating the Optimized Process Parameters in Die Casting of Aluminum Alloy
- Analysis of Three Dimensional Nonlinear Coupled Finite Element Based on some Concrete Rock-Fill Dam
- Experimental Research of Laser Cutting 1Cr17Mn6Ni5N Steel Plates
- Finite Element Analysis on Ultimate Bearing Capacity of Diagonally Stiffened Steel Plates with Different Span-Depth Ratio
- Status Analysis of Quality Prediction for Automotive Injection Molded Parts
- Stress and Deformation Analysis of Concrete Face Rockfill Dam Based on ABAQUS
- Multiscale Model of Shape Rolling Taking into Account the Microstructure Evolution – Frontal Cellular Automata
- Standard Technical Research of Shore-to-Ship Power Supply System
- A Survey of Common Technology and Data Model Standard of Equipment IETM
- Research on Risk Generation Mechanism of China’s Alternative Fuel Vehicle Industry
- Chapter 4: Products and Systems Design, Modelling and Simulation, Intelligent Automation and Control Systems
- A Product-Level Rapid Modeling Method for Mesh Reflector Antenna
- An Improved Calibration Algorithm for Low-Cost Laser Triangulation-Based Sensor
- An Islanding Detection Method for Photovoltaic Power Generation System Using Fluctuation Characteristic of PCC Harmonic Voltage
- Analysis and Improvement of the BLP Security Model
- Analysis of Design Parameter Sensitivity of On-Off Shift Solenoid Valve
- Automatic Evaluation Based on Computer Science
- Components Association Mechanism Supporting Requirements Tracing
- Design of High Performance Fixed Point CORDIC Processor
- Design of the Double-Stuffed Bag Machine Control System
- Direct Torque Control for Permanent Magnet Synchronous Motors Based on Fuzzy Regulator
- Effect of Control Parameters of Secondary Jet on Fluidic Thrust Vectoring
- Electronic Control Unit Design of Artificial Neural Network-Based Natural Gas Engine
- Microcontroller-Based Intelligent Traffic Signal Controller Design
- Millimeter-Wave Reduced-Size Wilkinson Power Divider
- Multi-Target Tracking Based on Regional Correlation and Color Histogram Match
- Nonlinear Position Control of Digital Hydraulic Cylinder Despite Disturbance
- Research on the Application of Wavelet Neural Network in Temperature Control System
- Research on Virtual and Actual Complex Firing Test Method for Anti-Aircraft Weapon System
- Secondary Cooling Control of Continuous Casting Process with Model Strategy
- Software System for the Multi-Field-Coupled and Multidisciplinary Optimization of Electronic Equipments
- Study on Digital Modeling of the Virtual Near-Earth Space for Astronaut Training
- System of Environment Monitoring Based on Internet of Things
- The Advanced Control Technology in the Application of the Traditional Boiler Control
- The Application of Piezoelectric Actuator for Small Aircraft
- The Calibration for Dual-Robot System Based on the Three-Point Method
- The Design of Greenhouse Temperature Control System Base on SimpliciTI
- The Design of Wireless Sensor Network Node Based on TinyOS
- The Development of Flow Controller Based on RF Card
- The Implementation of Sub-Window Contrast Adjustment in Large Screen Displayer for Aircraft
- The Optical Path Closed-Loop Control System
- The Research of Design and Simulation of Four-Wheel Drive Car ASR Controller Model
- Vehicles Categorization in Complex Background
- Virtual Assembly Training System of Special Equipment Chassis Based on Virtools
- Vision-Based Vehicle Detection in Real Traffic Environment Using Fast Wavelet Transform and Kalman Filter
- The Design and Realization of Real-Time Video Transmission System Using in Tracked Robot
- Research and Development of Instrument Testing Device Based on LabWindows_CVI
- Research on Electronic Automotive Combined Instrument Based on CAN Bus
- The Research of Wheel Drive Vehicle Yaw Stability Controller Based on Model Predictive Control
- Design on Control System of Automatic Sole Edge Grinding Machine Based on PLC
- The Design of Signal Generator in Motor Function Rehabilitation Based on MCU
- An Efficient Deadlock Avoidance Policy for FMS Using ROPN
- Modeling and Simulation of Brushless DC Motor Speed Control System Based on MATLAB/SIMULINK
- Moving Target Detection Based on Double Model
- Study on Numerical Simulation of Shrapnel Fragments at the Components Damage Effect on Armored Vehicle Concept
- Design of the Space-Based Optical Surveillance System Based on the Observation of Pinch Points Region on Earth Geostationary Orbit
- A Theme-Oriented Data Automatic Organization Method
- Chapter 5: Signal and Image Processing, Intelligent Recognition, Intelligent Algorithms and Methods, Сomputational Mathematics
- 2D DOA Estimation Using Sparse Representation of Higher-Order Power of Covariance Matrix
- A Cooperative Dual-Camera System for Face Recognition and Video Monitoring
- A Multi-Weights Ant Colony Algorithm for Solving Optimal Path in Tourism
- A New Edge-Based Method for Artificial Text Detection
- A Novel Image Encryption Algorithm Based on Cellular Automata and Chaotic System
- A Novel Learned Model for Boundary Detection
- Adaptive Sampling Based on GH-Distance for Realistic Image Synthesis
- An Improved BMQ Algorithm for Pattern Matching
- An Improved Method for Wild-Angle Image Correction
- An Improved Moving Body Detection Method Based on Gaussian Mixture Model and Differencing
- An Improvement Based on Wavelet Transform Speech Denoising Threshold Function
- Analysis of Motor Imagery EEG Based on Hilbert-Huang Transform
- Application of Improved Median Filtering Algorithm to Image De-Noising
- Association Rules Mining Based on Adaptive Fuzzy Clustering Algorithm
- Discrete Spectrum Error Analysis of Carrier Signal
- Discussion on Application of Digging out the Image in Photoshop Image Processing Method
- Driver Fatigue Detection Based on Eye Locating Algorithm
- Empirical Mode Decomposition on Geometry Signal Based Spherical Parameterization
- Estimation of Crowd Density Based on Adaptive LBP
- Face Recognition Classifier Design Based on the Genetic Algorithm and Neural Network
- Fuzzy C-Means Clustering Algorithm Based on Coefficient of Variation
- Iterative ML Symbol Detection without Timing and Phase Synchronization
- Multi-View Face Detection Based on Multi-Features AdaBoost Collaborative Learning Algorithm
- Non-Line-of-Sight Positioning Algorithm Based on Robust Principal Component Analysis
- Palmprint Recognition Based on Sparse Two-Dimensional Local Discriminant Projections
- Research on Association Rule Mining Algorithm Based on Distributed Data
- Research on Building IMC Model in Mobile Bank
- Research on Text-Related Speaker Recognition Based on First Order Differential
- Research on the Application of BP Neural Networks in 3D Reconstruction Noise Filter
- Research on Topology Association Rules Algorithm Based on Spatial Constraints
- Study on Extraction Method of Automobile Center Axis
- Study on Otsu Threshold Method for Image Segmentation Based on Genetic Algorithm
- Study on the Image Segmentation Algorithm with Depth Data of Kinect
- The Analysis of the Method of Screening Initiating Events Based on the Improved Borda Ranking Method
- The Application of Matrix Partitioning Algorithm in PageRank Computational Efficiency
- The Optimization of Adaptive PID Control Algorithm Based on RBF Neural Network
- The RFID Indoor Positioning Algorithm Based on Lagrange Interpolation
- Geometrically Robust Image Watermarking Based on Krawtchouk Invariant Moments
- Research on the Application of 20 Degrees Probe Pair in TOFD
- Design on Engineering Database of Bridge Seismic CAD System
- Angle Estimation with Knowledge-Aided Constraint-Based Space-Time Adaptive Monopulse
- Research on Modulation Recognition of the MPSK Signals Based on Statistical Analysis
- A Subdividing of Local Fractional Integral Holder’s Inequality on Fractal Space
- An Improvement of Local Fractional Integral Minkowski’s Inequality on Fractal Space
- An Improvement of Minkowski’s Inequality for Sums
- On Subdividing of Hölder’s Inequality for Sums
- Research on the Forward Euler Difference Method for Parabolic Equations
- The Local Fractional Hilbert Transform Based on Fractal Theory
- The Solution of 2D Parabolic Equations Based on the Alternating Direction Implicit Scheme
- Two Conclusions of Points Produced by Incremental Sub-Gradient Method for the Non-Differentiable Optimal Problem in Hilbert Space
- An Application of Computer Image Processing Technique to Decoration Pattern Design
- Commonly Used Correction Model Comparison, Improvement and Precision Analysis of Radiation Remote Sensing Image
- Efficient Multi-Scale Registration of 3D Reconstructions Based on Camera Center Constraint
- Identifying Abbreviations in Biomedical Literature Based on Maximum Entropy with Web Features
- Learning Object Groups for Scene Recognition
- Prediction of Aero Engine Fault by Relative Vector Machine and Genetic Algorithm Model
- Study on Astronaut Self-Rotation Methods in Space Flight
- The Basic Control Chart Pattern Recognition Neural Network
- Load Forecasting of Zhejiang Province Based on Combined Optimization Methods
- Optimization Vehicle Scheduling Based on Simulated Annealing Genetic Algorithm
- Research on Improved Immune Genetic Algorithm and its Application in Integration Planning
- Study of Vision-Based Hand Gesture Recognition System for Astronaut Virtual Training
- A Computer-Supported Axiomatic Design System Integrating TRIZ
- A Method to Forecast the Dynamics of Express Delivering Quality Elements Classification Based on GM(1,1) Model
- Based on the Location Entropy Method to Study the Agglomeration Development of the Software Industry of Jilin Province
- Application of Improved Grey Prediction Model in Jilin Province of the Software Industry
- Chapter 6: Information Technology and Networks Applications, Data Management and Software, Internet and Communications Technologies
- A Method for Verifying Traceability between Feature Model and Software Architecture
- An Improved Cluster Key Management Algorithm for Wireless Sensor Networks
- An Information Mining Model of Intelligent Collaboration Based on Agent Technology
- Design and Implementation of Public Bicycle Rental System Service Platform Based on IOCP and JSON
- Design and Implementation of Public Bike Smart Lease System
- Design and Implementation of University Computer Laboratories Course Scheduling System Based on WEB
- Design for the Application Layer of Network Security Solutions
- Design of Intelligent Community Network Compatible with IPv4/IPv6 Protocol
- Design of Smart Healthcare Data Management System Based on Hadoop
- Design of Vehicle Terminal Based on Android System
- Detection and Control of I/O Interface by Calling DLL in VB
- Distribution Center Multi-Objective Location Problem Using NSGA-II
- Domain Adaptation for Video Steganalysis against Motion Vector Based Steganography
- Empirical Analysis on Human Dynamics of QQ Group Communication
- Hash Technology for Connection Management in High-Speed Networks
- Network Case Establishment and Application Research under Portable Network Environment
- Network Coding Based Multiple-Hop Efficient Transmission Method for Multiple-User Multiple-Relay Networks
- Privacy Preserving for Location-Based Services in Road Networks
- QoS Routing Optimization Based on Improved Genetic Algorithm
- Research and Application of Importance Degree Evaluation Method of Complex Network Cascade Connection Node Based on Load Redistribution
- Research and Application of Network Technology and Online Translation Tools in English Translation
- Research in Hebei Private Digital Information Technology for the Development of Calligraphy and Art Institutions
- Research of the Intellectual Property Protection Based on the Internet Information Utilization
- Research on Adaptable Load Balancing of Task in Cloud Robots
- Research on Application of Network Video Technology Based on Cloud Computing Model
- Research on Archives Personalized Service System Based on Cloud Computing
- Research on LabSQL Database Technology in the Virtual Laboratory Design
- Research on Marketing Website Construction - A Case Study in Hospital
- Research on Physical Layer Network Coding Technology in Wireless Network
- Research on Public Health Information Resource Service System Based on Cloud Computing
- Research on Smart Healthcare Platform Construction Based on Cloud Computing
- Research on the Application of VPN Technology in the Computer Network
- Research on the Assessment of Disaster-Carrying Bodies’ Comprehensive Vulnerability on Variable Fuzzy Clustering
- Research on the Circulation of Urban and Rural Agricultural Products Based on the Network Technology
- Research on the Development of a Tourism Information System Based on Geographic Information
- Research on the Fault Diagnosis for Computer Network Based on VXI
- Research on the Realization of Network Accounting in Financial Information Times
- Researches on JVMTI-Based Security Enhancement Techniques for Java Software
- Study on Agricultural Information Service Mode in Cloud Computing
- Study on Information Graphics in Web Interface Design
- Study the Personal Push Service of University Library Based on Big Data Mining
- The Application of Path Analysis on Andriod GPS System
- The Exhibition Design and Implementation Based on Virtual Reality Technology
- The Network Security Analysis of Linux Operating System
- The Research and Improvement of Wireless Network Security Model
- The Research Based on CDN Technology in Communication System Server Design
- The Research of Campus Networks Layout and Application Based on IPv6
- The Research of Copyright Protection in P2P Network Mode
- The Research of Public Physical Training Service System Based on Cloud Computing
- The Security Issues and Common Attacks in Wireless Sensor Networks
- Research on RSSI and Triangles Deformation Based APIT Localization Algorithm for Wireless Sensor Networks
- Research on Sports Information Management Application System Development
- Research on the Communication Nodes Design of Wireless Sensor Network Data Based on ZIGBEE
- Research on the Design and Implementation of Scoring System for Large Sports Venues
- Design and Application of Small Coal Mine Management Information System
- Research on the Development of Sports Information System Based on the Sports Information Management Theory
- The Research on the Construction of Ancient Books Digital Resources
- Research on the Interactive Visualization Technique of Accounting Information System
- RETRACTED: A Methodology for the Emulation of Context-Free Grammar
- A Research of Improving the EG Key Pre-Distribution Scheme Based on the Hash Function and the Multi-Path Routing
- Analysis of Personalized Recommendation Models Based on Multi-Dimensional Ontology
- Improvement of Spatial and Temporal Co-Occurrence Pattern for Time Aggregate Graph
- Research on Duplicated Documentation Removal Model Based on Information Entropy and Decision Classification Techniques
- An Adaptive Performance Prediction Method of Distributed File System Based on Performance Correlation
- Complexity Analysis of Beijing Urban Rail Transit Network
- Research on the Application of Health Information System in Community Residents Based on the Internet of Things
- Research on the Key Technology in Data Transmission Based on the Control System of Internet of Things
- The Study of Cloud Computing Data Interaction Platform on the New Type of Rural Cooperative Medical Care System
- Design and Implementation of a Database for Human Resources Management of Higher Vocational Colleges
- Study on Batch Plotting the Profiles of the Beach on the Coast
- A Localization Algorithm of Nodes Based on Hypersphere Granular Computing in Wireless Sensor Networks
- Development of AutoCAD Graphic Database Management System Based on Component Technology
- COG Analysis System Design for Military Planning Based on Coordination Theory and ANP
- Chapter 7: Environmental Engineering and Resource Development
- An Empirical Model of Sediment Trapping Efficiency by Vegetative Filter Strips in Chinese Northwest
- Assessment of Sustainable Development Based on Emergy Ecological Footprint in the Beijing-Tianjin-Hebei Region
- Correlation Analysis of PM2.5 and NO2 Concentrations in City Ambient Air of Changsha
- Effects of Root Exudates from Invasive Plant (Mirabilis jalapa) on Soil Microenviroment under Different Land-Use Types
- Regeneration of the Brewing Spent Diatomite
- Research on Chaotic Characteristics of Diary Return Water Time Series in Qingtongxia Irrigation Area
- Research on Huaian Ecological Tourism's Development Based on TEF (Ecological Footprint of Tourism) Model
- Research on Natural Mowing Steppe Resources Based on AHP in Shaertao Mountain, ZHAOSU Xinjiang
- Research on the Prediction and Calculation Method of Settlement of Red Clay Foundation
- Reservoir Characteristics of Reef-Shoal Facies, Changxing Formation, Yuanba Gasfield, Sichuan Basin
- Shale Gas Organic Geochemistry Characteristic of the Mesoproterozoic Xiamaling Formation in Western Beijing Area
- Shale Gas Preservation Conditions in South Anhui of Lower Yangtze Area
- Study on Biocides of Municipal Middle Water Reused to the Circulating Cooling Water System
- Study on the Relationship between Soil Nutrient and Yield Analysis Based on Bivariate Correlation between
- Study on Thermal Insulation Solutions for Submarine Oil Storage in Offshore Gravity Platform
- The Interception and Decontamination of Nitrogen in Input Watercourse by Lake Wetland
- The Planning Study of Disaster Comprehensive Prevention of Nanjing City
- The Research of Reservoir Forming Characteristics of Tight Sand Gas
- The Study on Ecological Basic Flow in Baoji Section of Wei River
- Third-Order Sequence Division of Yunmengshan and Baicaoping Formation of Proterozoic in Yuxi District of China: an Example from Xiatang Profile in Lushan
- Ultimate Potential Nature Gas Resource Prediction and Exploration Direction in Sichuan Basin
- Vertical Dynamics of Soil Enzyme Activities and Active Organic Carbon in a Freshwater Marsh in Sanjiang Plain, Northeast China
- Software Design for Theory Analysis of Underwater Electromagnetic Field in Shallow Sea Environment
- The Efficient Water Resources Strategy
- Simple Methods of Carbon Capture by Using Photosynthetic Microorganisms
- A Study of Carbon Footprint Evaluation at PP-R Pipe Based on Life Cycle Assessment
- Chapter 8: Management, Economics, Social, Logistics and Engineering Management
- A Medical Decision Support System Based on Structured Injection Orders
- A Priority-Slot Based Continuous-Time Formulation for Crude-Oil Scheduling Problems with Oil Residency Time Constraint
- A Statistical Analysis of Papers and Author Group in Geomatics and Information Science of Wuhan University
- Aging Risk Between China and Russia Based on the Catastrophe Series
- Analysis of City Traffic Characteristics from GPS Data
- Analysis of College Student Employment Option under the Perspective of Evolutionary Game
- Application of Fast Mapping Techniques in Sudden Crisis
- Cloudy-Based Optimization of the Human Resource Management System
- Development of Logistics Park Based on Symbiosis Theory
- Dynamic Analysis of Human Behavior Based on User Log of ACM
- Efficient Crowdsourcing via Bayes Quality Control
- Evaluation Research of Pig Farmers’ Behaviors of Veterinary Drug Usage Based on Factor Analysis
- Facility-Optimizing Plan for Intersection System Based on Intelligence Traffic Management Technique
- Performance Evaluation of Logistics and Distribution
- Research of Bid Evaluation Risk Analysis Model Based on Decision Tree
- Research on Cigarette Consumption Behavior of Guizhou Based on MLP
- Research on Electronic Commerce Warehouse Logistics Management System Based on Cloud Computing
- Research on Influence of the Balance Sheet Channel Effect on Enterprise Investment
- Research on the Development of the Iron and Steel Enterprise Logistics
- Research on the Operation Models of Fresh Vegetable Logistics
- Research on the Pre-Judging and Pre-Warning Information Management System Based on the Tourism Crisis
- Reserve of Semi-Continuous Life Insurance Model under Random Interest Rate
- The Application Research of Basic Surveying and Mapping Product in Urban Management
- The Comparison on Corporate Governance between Temasek and State-Owned Companies in China
- The Empirical Research of the Relationship of Transportation Listed Company’s Capital Structure with Enterprise Value
- The Pathway Analysis on Benefit of Agricultural Science and Technology Projects (ASTP) Based on Logical Framework Approach
- The Study of SO2 Emissions Embodied in International Trade of China
- Total Factor Productivity and Convergence of Port Logistics with Tianjin Port
- The Design and Implementation of the Stadium Safety Evacuation System
- Evaluation of Knowledge Absorptive Capability of Enterprise Based on Entropy Weights and Interval TOPSIS
- Research on the Design and Realization of Management Information System of Enterprise Risk Assessment
- The Design and Implementation of Corporate Human Resources Management Information System
- Combination Weighting Method Based on Generalized Mahalanobis Distance and Weighting Relative Entropy
- Research on the Risk Assessment for the Construction Safety in the Planning and Design Stages of Bridge Engineering
- Chapter 9: New Technologies in Engineering Education and Teaching
- Application of AHP in Teaching Quality Evaluation for Polytechnic
- Development of Multimedia Teaching Software Based on Self-Learning
- Evaluation of College Coach Capacity in USA
- Research on College Students' Interpersonal Flat-Form under New Network Media Environment
- Research of the Teaching Mode for the Teamwork in Basketball Training
- Research on the Construction of Physical Education Curriculum Evaluation System Based on Information Technology
- Research on the Integration of Mail System and Digital Campus Platform
- Research on the Loss and Motivation of Teachers in the Civilian-Run Colleges and Universities
- The Application of Information Technology in Sports Teaching in Private Universities
- The Construction of Open Course Platform of Teaching Resources Oriented to Local Colleges and Universities
- The Design and Implementation of Student Management Information System under the Campus Network Environment
- The Design of Teaching Resources Platform Based on Cloud Computing in University
- The Development of Multimedia Teaching Software Based on Self-Learning Model
- The Reflection for Multimedia Technology Application in Medical Chemistry Teaching
- The Research and Design of Computerized Adaptive English Testing System
- The Research of Communication of Chinese Language and Culture under New Technologies
- The Research on the Mechanism Construction of the University Informatization in China
- Research on the Design and Realization of Electrical Training System Based on the Virtual Reality Technology
- Choose the Best Coach Based on the Theory of Grey System
- Research on Countermeasures Based on Enterprise Practice of the Higher Vocational Teachers
- Application of Wireless Network on Campus
- Research on the Status Quo and the Character of the Development of the National Fitness Program